|
TachoDrive2 Device for data downloading |
Flash codes
TD2S-IEN008-1306.1.0.0 |
|
|
|
||
|
|
||
|
Activity mode |
Description |
Concern C-card T- tacho TD2 |
Comments |
|
1 |
During connection |
|
|
|
2 |
Data transmission |
|
|
|
3 |
The data has been downloaded successfully |
C, T |
Buzzer three beeps in the loop |
|
4 |
WARNING – after downloading |
|
The data has been downloaded |
|
|
n=1 the card is full in more than 95% of its capacity |
C, T |
transfer the data from the key to the PC |
|
|
n=2 the data has been downloaded partially or not at all |
T |
Reason: no data found in the tachograph for the given period or company card number |
|
|
n=3 the data from TD configuration settings has been downloaded partially |
T |
Reason: there is no DTCO-1381 specific data for this tachograph – change TD configuration |
|
|
n=4 the data from TD configuration settings has been downloaded partially |
T |
Reason: there is no driver card in the tachograph - change the configuration of the TD key or insert the card and repeat the download process |
|
|
n=5 the Real Time Clock of TD2 is out of order ( firmware 2.49 or higher) |
TD2 |
Reason: probably the internal lithium battery is discharged. Contact you distributor pls. |
|
|
n=6 Hardware Anti-Virus Protection has removed a virus |
|
Disconnect the TD key from PC and connect it again. Scan the PC with your own anti-virus software. |
|
|
n=7 Last download file has been damaged (Download\LastDownload.txt) |
T |
Delete the LastDownload.txt file from Download catalogue. |
|
5 |
ERROR - while downloading |
|
Error while downloading the data |
|
|
N=1 Incorrect conditions to execute the operation |
C, T
|
i.e.: lack of card authorizing to download the data, ConditionsNotCorrect Or RequestSequenceError |
|
|
N=2 demanded data are not available |
C, T |
i.e.: lack of driver card while trying to download the data from the card, DataNotAvailable |
|
|
N=3 Unable to execute the operation |
C, T |
UploadNotAccepted |
|
|
N=4 The function is not supported by the tachograph |
T
|
General reject, Service not supported, Subfunction not supported, Incorrect message length, Request out of range |
|
|
N=5 The tachograph is not responding |
T |
Timeout. No response after three attempts |
|
|
N=6 Tachograph communication error |
T |
|
|
|
N=7 TachoDrive memory error |
C, T |
Format the memory or contact the seller |
|
6 |
WARNING TD2 batteries are empty |
TD2 |
Connect to main adapter or USB PC port |
|
|
N=2 |
|
L1,L2 = green+red two short flash Buzzer two short beeps When batteries are very low – signalisation in the loop |
|
|
|
|
|
|
LK1, LK2, LK3 sequentionally flashing |
|
Durring charging |
|
|
|
|
|
|
|
LK1, LK2, LK3 flashing
|
|
Press an appropriate button in order to choose what data would you like to download from the tachograph. ( according to the configuration – CNG, all data – ALL, data from card inserted into the tachograph – CARD). The LED on a selected button will flash and the buzzer will make a single sound. The data download will start or Insert the driver card into the TD2 slot. LK1, LK2, LK3 will turn off and the data download from the card will start. |
|